You are currently viewing How To Remove Agitator From GE Washer – 3 Easy Ways

How To Remove Agitator From GE Washer – 3 Easy Ways

  • Post author:
  • Post last modified:April 12, 2022

GE washing machine is one of the top reliable brands. Top-loading GE washing machines have a part called the agitator. This is a vital part of the washing machine. It is also called the stir.

 If the agitator stops working for any reason then it must be removed for maintenance or repairing purposes. Different types of agitators require different types of maintenance. 

Are you looking for ways how to remove agitator from GE washer? Then you have come to the right place. In this article, you are going to learn the ways that you can follow to remove the agitator from the GE washer. 

What is a washing machine agitator?

An agitator is a device that puts something into motion by stirring. There are various kinds of agitators. A washing machine agitator is one of them. In top-loading washing machines, the agitators work from the bottom of the wash basket.

 The wash movement is created by spinning back and forth, rolling garments from the top of the load, down to the bottom, and back up. There are various varieties of agitators, the most popular of which are “straight-vane” and dual-action” agitators. A “straight-vane” agitator is a one-part agitator with bottom and side fins that typically spins back and forth. The Dual-action is a two-part agitator with back-and-forth bottom washer fins and a spiral top that rotates clockwise to help lead the clothing to the bottom washer fins.

3 Simple Steps For How To Remove Agitator From GE Washer

“GE washer agitator” comes in three different types. Their removal processes are different from one another. 

1. Removing a bolted agitator

1. Remove the plug from your washing machine: Removal of the washing machine agitator is an easy task to do. But accidents can occur anytime no matter how disciplined you are at work. So for safety purposes unplug your washing machine from its power supply before starting. Doing so prevents you to get any kind of electrical shock.

2. Remove the agitator cap from the agitator: There are several models of GE washers that have agitators which are mounted in place with a solo metal bolt. For removing agitators of these types of washers that bolt should be removed. To have access to the bolt you should remove the cap of the agitator. This can be done by prying with a screwdriver.

Make sure that the cap isn’t glued down. Bolt caps that are glued down are normally fragile. If there is any bent while removing it will require a special glue from the manufacturer to replace.

3. Remove the bolt holding the agitator down: After you are finished with the removal of the agitator cap look down inside the barrel of the agitator. You will see a metal bolt that holds the whole agitator house in place. Unscrew it with a ratchet and remove it.

After removing the bolt lift the agitator up. It will easily come out. If not so it might be stuck in place with washing machine chemicals or assembled soap.

4. Reinstall by following the procedures in reverse order: In the case of bolted agitators,  reinstalling is very easy. Install the agitator back, replace the bolt and replace the agitator cap. Reinstalling your agitator is finished. Replug your washing machine and check whether the agitator is working properly or not.

2. Removing a Non-bolted Agitator

non-bolted agitator

1. Open the washing machine compartment: Old models of GE washers don’t include a bolt. So you might not need any excess tools like an “agitator removal tool” to remove the agitator. But sometimes you need them if chemicals have stuck the agitator in one place. At first, unplug the washing machine for safety purposes. 

2. Pull the agitator straight up: Next, just stand against the washing machine and pull the agitator straight up. The agitator should come out of its mounting with minimal force. Make sure not to twist or jerk the agitator from side to side. Be careful and avoid hurting yourself while pulling up the agitator.

3. Use the opportunity to lube the shaft: Most of the old models of GE washers have a metal shaft beneath the agitator. It requires casual lubrication to keep the agitator motion smooth. To make sure that the shaft is working properly apply a small amount of petroleum jelly to lubricate it. It is advised to lubricate it twice a year.

4. Call a repairman if the agitator doesn’t come off: The agitators of several models of washing machines can’t be removed normally. They require special tools or methods which only professionals can give. So you can’t remove the agitator even if it looks like it can be removed by any amateur. You will need to call a professional service or repairman to remove the agitator in a good manner.

3. Removing a Stuck Agitator

1. Make sure that the agitator isn’t bolted down: Because using many years of water, soap, and several washing machine chemicals can harden the agitator base sometimes. Freezing it can make it very complicated to remove. In this case, it might be possible to remove the agitator by using a well-built 2×4 plank as a normal lever.

If in this method a force in the agitator is bolted then it might damage or even can break the agitator inside the washing machine. For this, it’s necessary to make sure that the agitator is not bolted before applying this method.

2. Fill the agitator’s bottom half with boiling water: Next, fill the washing compartment about six inches with hot water so that it can completely cover the bottom of the agitator. This will help to loosen any default soap or chemicals so that they will be easier to remove.

3. Make a sturdy rope loop around the agitator: Take five feet long rope. Fold it over and loop it around itself to secure it between the agitator neck’s fins. Give it a solid upward pull to make it tight and make sure it’s secure.

4. Use the 2×4 as a lever to pull the agitator off: Put solid pressure at the end of the wood piece outside the washer. This will help you to raise the agitator from the end. Then use the well-built 2×4 plank as a lever and pull the agitator off. If you aren’t able to remove the agitator in this way then you might call a professional to help you out.

Frequently Asked Questions (FAQ)

1. What causes a washing machine not to agitate or spin?

Answer: If your washer fills with water but does not agitate, the problem is most likely a malfunctioning lid switch, a damaged belt, or a motor problem. 1 Examine the spin cycle on the washing machine. If this works, it means the motor is running and the belt is not broken. If the spin cycle does not function properly, the belt may be loose or broken.

2. Is it possible to use a washing machine without the agitator?

Answer: You’ll waste less energy and water if you don’t use an agitator. A washing machine without an agitator is a high-efficiency device for the home. Even though this sort of washer has a higher capacity, it uses less water and energy than one with an agitator.

3. What exactly is the distinction between an impeller and an agitator?

Answer: Impeller machines may be less harmful to clothing, but due to their softer action, they may not clean garments as thoroughly as agitator machines. Agitators are harsh on clothes, yet their twisting and turning remove dirt swiftly and completely.

4. How do you repair a washing machine’s agitator?

Answer: Remove the snap-in retaining plate by turning it upside down. Install the replacement agitator dogs and retaining plate after that. Then replace the ratcheting component, tighten it, and replace the lid. Remove the fabric softener dispenser and detach the ratchet assembly holding bolt if your washer has one

Final Words

A damaged agitator can hamper your washing machine’s productivity. So removing a damaged or faulted agitator as soon as possible is very important. If you are in need of how to remove agitator from GE washer you can go through this article and follow the steps accordingly. It will help you to achieve your goal. Cheers!

Brian Pierce

Brian Pierce is a professional gardener who has vast experience in gardening and home decorating. Being cultivating his skills, he has been to many home and garden related seminars of typical fashion. So, now he has decided to share his years of knowledge, experience, opinions, tips, and above all his hobby on the internet. Find him on Twitter here. Happy Reading!

Leave a Reply